Handheld Portable Lead Acid Battery Internal Resistance and Conductivity Tester

• Customization: Available
• After-sales Service: Yes
• Warranty: 12 Months
• Model NO.: TK-200
• Type: Storage Battery Tester
• Test Region: All
• Application: Lead-acid Battery
• Customized: Customized
• Transport Package: Carton
• Specification: 170× 90× 35mm
• Trademark: CUBWILL
• Origin: China
• HS Code: 9030390000
• Production Capacity: 10 Million PCS/Year
• Package Size: 175.00cm * 95.00cm * 40.00cm
• Package Gross Weight: 0.500kg

Product Description

12V 24V Car battery tester LCD Battery Analyzer 

Test Tool Digital Analyzer Tester for Car/Truck /Motorcycle/SUV Boat and More

Main function : Battery test. 
Usage scope : All lead-acid starter battery, incuding regular flooded, EFB,AGM tablet battery, AGM winding battery, GEL battery, WET, etc. 
Suitable for : Automobile &Motorcycle facory, garage, battery manufacturer, auto, battery agent, educational institution, DIY enthusiasts,etc. 

The TK-200 battery internal resistance tester is a performance detection tool for lead-acid batteries, supporting 12V/24V battery testing. It can effectively measure the battery's current health status, remaining capacity, internal resistance, and its discharge capability. Featuring input over-voltage protection, poor contact alerts, reverse connection protection, and other safety functions, this device offers simple operation, precise measurements, safe testing procedures, and causes no damage to batteries. It accurately evaluates the battery's performance parameters under current conditions.

Product Description

Model	12V 24V Car battery tester LCD Battery Analyzer
Shell material	ABS
Outline dimension	L*W*H	170×90×35mm(6.7×3.54×1.38inch)
Test range	3AH-400Ah(Maximum:2000CCA)
Storage Temperature	-20'C to + 70'C( -4'F to 158'F)
Working Temperature	-20'C to + 60C( -4'F to 140'F)
Voltage measure range	8-30VDC
Test result	SOH .SOC. CCA Value . iR . etc
Test standards	CCA. IEC . SAE . EN . DIN . CA
Display	2.7"LCD
Cable reach	650mm( 25 .6 inches )
Net Weight	355g(0.78lb)

Product Features

Key Features

(1) Integrated safety protections: Input over-voltage protection, reverse connection protection, and poor clamp contact detection alerts.
(2) Uninterrupted safe testing: Zero current generation, no heat buildup, spark-free operation, and risk-free handling.
(3) 3-second rapid analysis: Precisely measures battery status within approximately 3 seconds.
(4) Direct on-site testing: Connects to batteries without removal, including in-vehicle applications.
(5) Capacity & lifespan assessment: Displays remaining capacity and battery health status.
(6) Voltage/discharge diagnostics: Measures voltage state and discharge capability, with toggle display via up/down navigation buttons.

Operation Steps:

(1) Connection: Attach the red clamp to the battery's positive terminal ("+") and the black clamp to the negative terminal ("–"). The display illuminates upon secure connection.
(2) Battery Type Selection: Use ∧/∨ buttons to navigate the flashing cursor. Select battery type (Automotive/Electric Vehicle) and press the right CONFIRM button.
(3) Automotive Mode:

Navigate with  ∧/∨to choose the battery standard (CCA, IEC, SAE, EN, DIN, CA) labeled on the battery.
Press CONFIRM.
Special Case: If no standard is labeled, select "Automotive + CCA," then set discharge current per the "Battery Capacity vs CCA Reference Table".
(4) Discharge Current Setting:
Adjust max discharge current with  ∧/∨ (hold >1s for rapid adjustment).
Press CONFIRM after setting. Reference: Battery label or "Reference Table".
(5) Electric Vehicle Mode:
Set battery capacity (Ah) via  ∧/∨ (hold >1s for rapid adjustment).
Press CONFIRM to initiate testing.
(6) Results Review:
Toggle with ∧/∨ to view:

Parameters: Internal resistance, voltage, discharge capability
Status: Lifespan, capacity, health rating (Excellent/Good/Poor/Replace)
(7) Error Correction: Press RETURN or SYSTEM RESET to reconfigure during testing.

Precautions:

(1) Testing Condition: Avoid testing during charging/discharging to prevent inaccuracies.
(2) Contact Safety: Never touch battery terminals or clamp contacts during operation.
(3) Secure Connection: Ensure full clamp-terminal contact. If "ERO" appears with beeping, check clamps.
(4) Battery Restriction: For lead-acid batteries ONLY. STRICTLY PROHIBITED for lithium batteries.
(5) Voltage Range: Operates at 8-30V. Under/over voltage triggers protection (device inoperable).
(6) Charge Level: Test only when fully charged for accurate data.
(7) Voltage Stabilization: Wait 10+ mins after charging before testing automotive batteries. Tip: Turn on headlights for 3 mins to stabilize voltage.
(8) Safety Inspection: Verify clamp insulation integrity. Never operate with open rear cover (electric shock risk).
(9) Environment: Avoid high temp/humidity, flammable/explosive areas, and strong electromagnetic fields.
(10) Short-Circuit Prevention: Never let clamps touch each other.
(11) Malfunction Response: Contact after-sales service immediately. Do not disassemble.